Pid digital temperature controller with universal input, analog, relay, SSR 4-20mA output (XMTE-918)

SpecificationsXMT-908 intelligence-ability temperature controller is a kind of high performance & reliability intelligence-ability temperature control meter, they are widely used in the automatic control system of the temperature, chemical, ceramics, light, metal, petrochemical and heat treatment industryMain technical speci

Featured Products

Specifications

XMT-908 intelligence-ability temperature controller is a kind of high performance & reliability intelligence-ability temperature control meter, they are widely used in the automatic control system of the temperature, chemical, ceramics, light, metal, petrochemical and heat treatment industry

Main technical specification
1. Measurement deviation: ≤ ± 0.5%F. S± 1
2. Cold end compensating deviation: ≤ ± 2.0C
3. Sampling cycle: 0.5S
4. Control cycle: Relay output 2120S, other is 2S.
5. Relay output contact capacity: AC250V/7A (resistance load) or AC250V/0.3A (perceptual
Load)
6. Driving controllable pulse output: ≥ 3V scope, ≥ 40us width's over zero or trigger contact pulse
7. Driving solid relay signal output: Driving electric current≥ 15mA, voltage≥ 9V.
8. Continuous PID: 010mA (load 500± 200Ω ), 420mA (load 250± 100Ω ), or 05V (load≥ 100kΩ ), 15V (load≥ 100kΩ )
9. Exterior and hole size: 48× 48× 110 44× 44
10. Power: AC85V242V, 50/60Hz
11. Working condition: Temperature 0-50.0C, relative humidity≤ 85%RH, without corrode and strong electric radiation.

Meaning of the model code

XMT _ -  9   _   8   __
      (1) (2) (3) (4) (5)
(1)The surface dimension(mm):
Blank:160×80×120 Installation hole 152×76; 
A:96×96×110 Installation hole 92×92;
D:72×72×110 Installation hole 68×68; 
E: 48×96×110 Installation hole 44×92; 
F:96×48×110 Installation hole 92×44; 
S:80×160×120 Installation hole 76×156
G:48×48×110 Installation hole 44×44 

(2)Control Mode: '9':4-key gentle push-switch setting,double row 4-LED digital display,PID and ON/OFF(P=0)control can select. 
(3)Additional alarm:'0':no alarm ; '1':one group alarm; '3':two group alarms '5':voice alarm
(4)Signal input type:'8':freely exchange signal 

(5)Suffix:
Main control output method:
'Blank':relay's open and closed contact output;
'A':Single-phase over-zero spark pulse; 
'A3':Three-phase over-zero spark pulse;
'B':Single-phase shift-phase spark pulse; 
'B3':Three-phase shift-phase spark pulse;
'C':0~10mA or 4~20mA constant electric current output 
'G':ON/OFF solid state relay(SSR)adjustment output;
Auxiliary ways:
'K':with RS485 or RS232 communication module interface; 
'Wt':with micro-printer output signal;



Connection Method

Pid Digital Temperature Controller with Universal Input, Analog, Relay, SSR 4-20mA Output (XMTE-918)


 
 
 

Code setting mode
SeriesCodeNameSetting rangeManual Ex-Factory
0SPSetting value of temperatureDetermined by P-SL P-SHControl output corresponds to indicator light "OUT".
Please refer to "5.2,The SP setting"
50
1AL1Alarm 1Determined by P-SL,P-SH when the upper and lower limit alarm, it is0~50.0 when the positive deviation alarm and negative deviation alarm 
Please refer to ALP1
Corresponds to indicator light"ALM1"
300
2AL2
()
Alarm 2Please refer to ALP2
Corresponds to "ALM2" indicator light
100
3PProportion modulus0~200When the P↑,the proportion and differential
function↓;If the P↓,the proportion and
differential function↑
When P=0,the meter is under ON/OFF control
15
4ICalculus time0~2000S 240
5dDifferential time0~200S 30
6AtSetting itselfON/OFFON:open function of setting inself
OFF:close function of setting itself
OFF
7tControl period2~120SThis function is no meaning under "ON/OFF". It is preseted 20s in factory.20
8HyMain control by
drop in level
0.1~50.0Only have meaning when main control output is ON/OFF(P=0)1.0
9Hy1drop in level of
AL1
0.1~50.0It is used as setting of drop in level
for AL1 relay output  
1.0
10Hy2
()
drop in level of
AL2
 
0.1~50.0It is used as setting of drop in level
for AL2 relay output 
1.0
11PbSensor error amendment±20.0The sensor have deviation can use item to revisal0
12FILTFilt modulus0~50Is the software filter constants of  measurement sampling.The constant ↑,the measurements antijamming capability measurements antijamming capability↑, but the measurement and system time ↓20
13dpDisplay precision0~11: have radix point,0: have not radix point0
14P-SHThe max.value of temperature range-They are used to reset proper temperature range as per user'application.
As for the Max. temperature range for
different inputs, please refer to Sn,
P-SH≥P-SL
400
15P-SLThe min.value of temperature range-0
16OUTL
()
The min. value
Of allowable output  
0~OUTHCan achieve low and high output limiter. Meaningless when manual and ON/OFF control0
17OUTH
()
The max. value
Of allowable output
OUTL~200200
18ALP1AL1  and its output definition0~4'o':indicate no alarm
'1':upper limit alarm
'2':lower limit alarm
'3': positive deviation alarm
'4': negative deviation alarm
1
19ALP2()AL2 and its output definition0~40
20COOLSystem function choice0~1'0':reverse control(heat)
'1':positive control(cool)
0
21OPPO()Open power output0~100Soft start function that meters coefficient after first output of electric power0
22LOCKCode lock0~50LOCK=0,all the parameter can be revised
LOCK=1,only the SP can be revised
LOCK>1,all the parameter can not be revised
0
23SnInput typeCU50()
PT100()
PT100()
K(),E(),J()
T(),S()
Input type      Max. temperature range
CU50          -50.0~150.0ºC
PT1            -200.0~200.0ºC
PT2            -200.0~600.0ºC
K              -30.0~1300ºC
E              -30.0~700.0ºC
J               -30.0~900.0ºC
T             -200.0~400.0ºC
S              -30.0~1600ºC
 
24OP-A
()
Output type 
RLP()
SSR()
Zero()
Mut()
0~10MA()
4~20MA()
RLP Relay output
SSR Solid state relay
Zero Zero passed trigger of controlled silicon
Mut Controlled silicon phase-shifted trigger
0~10MA linearity current control output
4~20MA linearity current control output
 
 
RLP



Certificate 
Pid Digital Temperature Controller with Universal Input, Analog, Relay, SSR 4-20mA Output (XMTE-918)




 Packaging Detailed
Pid Digital Temperature Controller with Universal Input, Analog, Relay, SSR 4-20mA Output (XMTE-918)


 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours